
Add to Cart
20 T Material Transfer Cart / Battery Powered Cart Running On Cement Floor
20t Battery Powered Material Transfer Cart Running on Cement Floor
The Material Transfer Cart is battery powered and the material transfer cart is widely used in factory workshop.For the trackless transfer cart, It’s easy to turn 360 degrees at a minimum turning radius. The operation ways are hand held push button and remote control, the steering wheel sets coordinate with die wheel sets to carry the loads on the customized platform.
Product parameters
Moldel | BWP-5T | BWP-10T | BWP-25T | BWP-40T | BWP-65T | BWP-100T |
Length(mm) | 2000 | 3600 | 4500 | 5000 | 5600 | 6000 |
Width(mm) | 1500 | 2000 | 2200 | 2500 | 2500 | 2600 |
Height(mm) | 450 | 500 | 600 | 650 | 700 | 800 |
Wheel Diameter(mm) | 270 | 300 | 400 | 500 | 600 | 600 |
Ground Clearance (mm) | 50 | 50 | 50 | 50 | 75 | 75 |
Motor Power(Kw) | 1 | 1.6 | 2.2 | 4 | 6.3 | 8/10 |
Running Speed(m/min) | 0-30 | 0-25 | 0-20 | 0-20 | 0-20 | 0-20 |
Max Wheel Load(KN) | 14.4 | 42.6 | 77.7 | 142.8 | 221.4 | 343.8 |
Battery Capacity (Ah) | 180 | 160 | 250 | 330 | 400 | 600 |
Battery Voltage(V) | 24 | 48 | 48 | 48 | 48 | 72 |
Running time when full load(h) | 4.5 | 4.8 | 4 | 3.5 | 3.3 | 3 |
Advantages
I.Trackless transfer cart easy to turn 360 degrees at a minimum turning radius.
II.The operation ways are hand held push button and remote control, the steering wheel sets coordinate with die wheel sets to carry the loads on the customized platform.
III.Flat transfer cart's power source is DC motor power, through reducer enlarge the torque and provide power to die wheel sets.
V.The safety device is LED audible and visual alarm as warning symbol, and the external automatic charger is equipped for battery recharge.
VI.Battery is easy to replace within 5min , full load continuous running 6 hours , the Intelligent charging device can charge the battery full within 8 hours.
Details of Battery Powered Material Transfer Cart
Customer Case